8-port Gigabit Desktop Switch with 8-port PoE +
TL-SG1008MP
Description
What this product can do
The TL-SG1008MP is an 8-port Gigabit Desktop/Rack mountable switch with all 8 ports supporting the PoE + standard. It provides an easy way to extend a wired network by transferring power and data over a single Ethernet cable. With a total consumption of 126W, and up to 30W per port, the TL-SG1008MP can power multiple high-performance devices such as wireless access points (APs), IP cameras or IP phones. Thanks to innovative energy-efficient technologies, the TL-SG1008MP can save up to 75% on electricity consumption, making it an environmentally friendly solution for your business network.
How this product works
All 8 TL-SG1008MP ports support the Power over Ethernet Plus (PoE +) standard, which can automatically detect and power any IEEE 802.3af/compliant device (s). In this case, electricity is transmitted along with the data in a single cable, allowing you to extend the network where there are no electrical cables or outlets where you want to repair devices such as APs, IP cameras, or IP phones.
Overload arrangement
The TL-SG1008MP has a priority feature that helps protect the system in the event of a power overload. If the power consumption of all PoE + devices is greater than or equal to 126W, the priority will be arranged between the 8 PoE + ports, at which point the system will turn off the power to the lowest priority port.
Port priority function
- Priority (port 1> port 2> port 3> port 4> port 5> port 6> port 7> port 8): This feature helps protect the system in the event of a power outage. For example, if port 1, 2, 4, and 7 use 30W (maximum power on one port is 30W, total system power is 126W), and another 25W device is connected to port 3, the system will turn off power to port 7 in response to power. exceeding the limit of 126 W. This means that port 1, 2 and 4 will use 30W, port 3 will use 25W and port 7 will be without power because it has the lowest specified priority value among the ports used.
Easy to use
The TL-SG1008MP is easy to install and use. No configuration or installation required. With a built-in Desktop/Rack design, superior performance and quality, the TP-Link TL-SG1008MP 8-Port Gigabit Desktop/Rack Switch with 8-Port PoE is a great choice for expanding your home or office network.
Properties
8 10/100/1000Mbps RJ45 ports
It is equipped with 8 supported PoE + ports for data transmission and power supply via a single cable
Works with IEEE 802.3af/compliant devices, extending home and office networks
Innovative and efficient energy saving technology reduces energy consumption by up to 75% *
It supports the PoE + standard with a total consumption of 126W and up to 30W per port
Plug and play design, no configuration required
- Actual data may vary under different conditions of use.
Technical specifications
HARDWARE FEATURES
Interface
- 8 10/100/1000Mbps RJ45 Ports
- AUTO Negotiation/AUTO MDI/MDIX
Network Media
- 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
- EIA/TIA-568 100? STP (maximum 100m)
100BASE-TX: UTP category 5, 5e cable (maximum 100m)
- EIA/TIA-568 100? STP (maximum 100m)
1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m)
- EIA/TIA-568 100? STP (maximum 100m)
Fan Quantity
Power Supply
PoE + Ports (RJ45)
- Standard: 802.3at/compliant
- PoE + Ports: 8 Ports
- Power Supply: 126W
Backbound Bandwidth
Mac Address Table
Buffer Size
Dimensions (W x D x H)
- 11.6 * 7.1 * 1.7 in. (294 * 180 * 44 mm)
Mounting
Max Power Consumption
- 9.89W (220V/50Hz. No PD connected)
- 140.67W (110V/60Hz. With 126W PD connected)
Max Heat Dissipation
- 33.74BTU/h (no PDconnected)
- 492.56BTU/h (with 126W PD connected)
SOFTWARE FEATURES
Advanced Features
- Compatible With IEEE 802.3af/at Compliant PDs
- Priority Function
- Mac Address Auto-Learning And Auto-Aging
- IEEE802.3x Flow Control For Full-Duplex Mode And Backpressure For Half-Duplex Mode
Transfer Method
OTHERS
Certification
Package Contents
- TL-SG1008MP, Power Cord, Installation Guide, Rackmount Kit (for 19 "rack), Rubber Feet
Environment
- Operating Temperature: 0? ~ 40? (32? ~ 104?)
- Storage Temperature: -40? ~ 70? (-40? ~ 158?)
- Operating Humidity: 10% ~ 90% non-condensing
- Storage Humidity: 5% ~ 90% non-condensing