Shielded panel integrating 16 passive POE injectors suitable for powering up to sixteen active elements in a 19 "rack design.
Universal solution for remote power supply of a large number of active elements with integrated extractor via Ethernet.
Professional solution for remote power supply of a large number of active elements with integrated extractor via Ethernet.
By adding this walk-through panel to the switchboard, you get a power center, which you can easily connect between the existing switch and the patch panel, which already leads to the powered device (IP camera, IP phone, wireless elements, etc.)
• 19 "rack design
• for supply range 12 - 56V
• LED indicator for correct polarity connection (4/5 +, 7/8V- green/4/5-, 7/8 + red)
• reversible fuse against current fluctuations (OCP protection 650mA) on each port
• input for power connector via standard 2.1mm socket or power terminal block (grounding element - zero)
Use:
Ethernet ports without power supply (eg switch) are connected to RJ45 connectors on one side.
The opposite side of the device is connected using power over an Ethernet cable.
Two unused pairs of Ethernet cable are used for power.
Supply pairs: 4.5 (positive pole)/7.8 (negative pole)
Interface:
16x RJ45 connector for LAN connection (Data)
16x RJ45 connector for combined output (Data + Power)
The power supply is not part of the delivery, the choice and performance parameters of the power supply must be optimized according to the respective consumption of powered elements and their configuration.
Maximum allowed power values at the input to the POE panel:
24V: 250W (10A)
48V: 500W (10A)
TECHNICAL SPECIFICATIONS:
Input: 12 - 56V DC 50/60Hz
Output: 12 - 56 V 160W (Min)
Data in pairs: 1/2 & 3/6
Power supply in pairs: 4/5 V + & 7/8 VData
Weight: 1.0 Kg
Dimensions: 482.6mm × 44.3mm × 25mm
Ethernet: Cable TIA/EIA 568 Cat5E, Cat6E
Data rate: 10/100Mbps
Connector: shielded RJ-45
Operating temperature range: 0 ° C ~ 40 ° C
Range warehouse. temperatures: -40 ° C ~ + 70 ° C
Humidity (operational): 10% ~ 80% RH
Humidity (storage): 5% ~ 90% RH
Certification: CE