Ubiquiti UniFiSwitch US-8-150W - UniFi Switch, 8ports, 150W
OVERVIEW
Gigabit PoE switch Ubiquiti UniFiSwitch US-8-150W in desktop + rackmount design with a maximum PoE power supply of 150W.
A manageable switch with 8 gigabit metallic + 2 gigabit SFP ports and a total throughput of 20 Gb/s.
Its biggest advantage is gigabit PoE on each port, which can be set as active PoE 802.3af/at with a maximum power of 34.2W/port or passive 24V with a maximum power of 17W/port.
Automatic detection guarantees full functionality of 802.3af and 802.3at devices without prior configuration.
Passive 24V PoE must be set up permanently.
The fundamental difference between the switches of the UniFiSwitch series and the EdgeSwitch series is in management - the WebGUI management of EdgeSwitch switches is replaced by the UniFi Network application in UniFiSwitch models.
Package contents
- device
- power cable
- mounting ears up to 13 rack
TECHNICAL SPECIFICATIONS
Technical parameters
Physical characteristics
Design: Desktop, Rackmount
No fan: Yes
Chassis: Metal
Buttons: Reset
Operating temperature [°C]: -5 to 40
Depth [mm]: 204
Width [mm]: 235
Height [mm]: 43
Connectors and interfaces
LAN Speeds: (8) 10/100/1000Mbps
SFP/SFP+ Speeds: (2) 1000Mbps
Power supply
Max. power consumption [W]: 150
Power supply type: From the mains (230V)
Supported PoE standards: 802.3af, 802.3at, Passive 24V
Number of PoE Out ports: 8
PoE budget [W]: 150
Power supply via connector/terminal block: 230V AC
In general
Packet transfer rate [Mpps]: 14.9
Switching speed [Gbps]: 20
Software
Management: SSH, Telnet, UniFi Network application
Features: VLAN
Default IP address: Dynamic from DHCP
Default username and password: Ubiquiti/Ubiquiti