Wi-Fi Wireless Network Card 6 - QXP-W6-AX200
Link to manufacturer website: https://www.qnap.com/en-us/product/qxp-w6-ax200
Function
The QXP-W6-AX200 is a Gen 2x1 Wi-Fi 6 wireless PCIe adapter with an Intel® Wi-Fi 6 AX200 module that supports the IEEE 802.11ax standard (backward compatible with 802.11a/b/g/n/ac), MIMO 2Tx2R , MU-MIMO TX/RX and Bluetooth 5.0. The QXP-W6-AX200 can be installed on a QNAP NAS or Windows®/Linux® computer to provide a fast Wi-Fi 6 connection. The QXP-W6-AX200 can also be used with a Wi-Fi 6 router to establish a Wi-Fi network environment. -Fi 6. The QXP-W6-AX200 comes pre-installed with a full height bracket and includes two low profile brackets.
SPECIFICATIONS
Wi-Fi 6 PCIe card
IC controller
- Intel AX200 wireless module
PCIe interface
Theoretical maximum power
Antenna
Supported operating systems
- QTS 4.4.3 or later
- 64-bit Windows 10® computer (driver download and installation from Intel website)
- Linux kernel 5.1 or later (driver download and installation from Intel website)
Hardware requirements
- NAS or computer with PCIe slot, 64-bit processor and operating system.
Package contents
- 1x card QXP-W6-AX200 (GC-WBAX200 edition QNAP, pre-installed holder with full height)
- 1x installation manual
- 2x low-profile half-height brackets (standard bracket and flat bracket for NAS)
- Driver CD for Windows 10®.
Operating temperature
- 0 ° C - 40 ° C (32 ° F - 104 ° F)
NAS software specification
- Supports QTS 4.4.3 or later
- Security protocol: No authentication/WEP/WPA-personal/WPA2-personal
- Supports the login portal authentication method: WiFi access via configuration using Qfinder/Browser Station.
Suitable for models: PCIe NAS and Windows 10/Linux computers