iGET SECURITY M3P14 - Wireless. smoke detector, standard EN14604: 2005, separate or for M3 and M4 alarms

iGET SECURITY M3P14 - Wireless smoke detector

It is a smoke detector that can work independently or as an accessory for the iGET SECURITY M3 alarm. Meets all provisions incl. EN14604: 2005. High battery life, unobtrusive design. Optical smoke detection.

Optical radiation is scattered in the detector chamber and smoke is detected and subsequently an acoustic and light alarm is triggered.

The smoke detector is an integral part of houses, cottages, apartments, garages, etc.

Main parameters:
- the detector is designed to detect the smoldering fire, after detection of the smoldering fire, the optical and acoustic signaling is activated. When connected to the central alarm unit, this unit will also be informed of an alarm,
- This detector works on the principle of diffused light, is very sensitive to the larger particles that are contained in the smoke,
- whether the detector is fully functional can be detected using the built-in test button,
- The main destination is to houses, cottages, flats. Not intended for industrial environments,
- not designed for caravans and residential buildings,
- The detector can also be wirelessly connected to the iGET SECURITY M3 alarm to provide comprehensive protection. The alarm will also trigger the siren upon receipt of the alarm signal and send an SMS about this,
- the detector operates at a frequency of 433.29 MHz, thanks to which it can be used with many alarms of other brands operating at the same frequency,
- Simple extension of the iGET SECURITY M3 basic set.

Specifications:
Transmission frequency: 433.29 MHz
Operating temperature: - 10 ° C ~ + 40 ° C
Operating humidity: 5% ~ 90%
Supply voltage: 2x 1.5 V battery, type AA
Security coverage: 9 m
Operating current: 22 mA
Quiet current: 0.06 mA
Range of signal to central unit: up to 100 m at direct visibility

For more information, please visit www.iget.eu