iGET SECURITY M3P13v2 - wireless keyboard with RFID reader for M3 and M4 alarms

iGET SECURITY M3P13v2 - Wireless Keyboard with RFID Reader

Wireless RFID keypad for remote alarm control. It is designed for iGET SECURITY M3 alarm. It is used to activate, deactivate the alarm, and activate the Home mode by using the keypad when entering a numeric code. It can also be used together with the RFID key/M3P22 chip for easy operation. Contains a status bar.

Wireless External Keyboard with RFID iGET SECURITY M3P13v2 is an accessory for the iGET SECURITY M3 alarm. It is fully touch-sensitive and includes indication diodes such as alarm and status keys. It comes with a Li-ion battery for up to 6 months without mains power and is typically powered by a 230V mains adapter. The main advantage of using the keypad is that the alarm unit is safely stored and the alarm can be operated remotely - ensure a higher level of protection, as an unwanted visitor would have trouble finding the main unit. When the battery is low, the keypad informs the central unit that sends the SMS, Contains a tamper (trigger an alarm when the back cover of the keyboard is removed). Using the RFID key/chip, iGET SECURITY M3P22 together with the keyboard can be controlled via RFID.

Main parameters:
- simple extension of the basic alarm set and increase of security level,
- contains status bar with LEDs for alarm status information (red: alarm active, green: alarm inactive, blue: home mode),
- using the RFID key, the alarm can be activated and deactivated,
- Keyboard powered by 230 V, 50 ~ 60 Hz, 5 V DC 2 A,
- it also contains its own internal Li-ion battery, when the keyboard power supply is disconnected for up to 6 months,
- The iGET SECURITY M3 alarm can be controlled using the iGET SECURITY M3P13v2 keyboard, using the iGET SECURITY M3P5 keypad and the iGET SECURITY mobile application. The status is always synchronized on all devices.
- When the iGET SECURITY M3P22 RFID key/chip is purchased, the keyboard can also be controlled via RFID (deactivate alarm)
- Using the RFID key/chip iGET SECURITY M3P22 together with the keyboard can also be controlled by RFID (alarm activation and deactivation)
- contains 4 functions for different alarm settings:
a) "lock lock" button: total alarm activation for the time the house will be empty,
b) "unlock lock" button: total alarm deactivation, no detector will trigger an alarm,
c) "house" button: Home mode, partial alarm activation, eg internal detectors will be deactivated while the outdoor will be active (eg for a garage),
- contains a tamper (trigger an alarm when the back cover of the keyboard is removed).

Specifications:
Transmission frequency: 433.29 MHz
Operating temperature: 0 ° C ~ + 60 ° C
Operating humidity: 5% ~ 96% (non-condensing)
Supply voltage: Adapter 5 V DC 2 A, internal Li ion battery 890 mAh - up to 6 months!
Total 13 touch keys + status bar with 3 LEDs (red, green, blue)
Signal range to the central unit: 100 m in direct view
Dimensions and weight: height: 145 mm, width: 92.1 mm, weight incl. battery 162.3 g

For more information, please visit www.iget.eu