The slim USB 3.2 Gen 1 AXAGON CRE-S2N SUPERSPEED memory card reader supports all current versions of SD and microSD cards, including SDXC and microSDXC with a capacity of up to 2TB.
Thanks to the USB 3.2 Gen 1 (USB 3.0) interface, the reader achieves significantly higher transfer speeds for UHS-I SD cards compared to readers with a USB 2.0 interface.
The reader will be pleased with the possibility of simultaneous work with cards in both slots and direct copying between them.
The slim body of the reader does not prevent the use of secondary USB ports of the computer, the matte surface of the reader reduces the creation of fingerprints.
The installation can also be done by a complete layman - you insert the reader into the USB port of the computer and the rest will take place completely automatically.
Card reader - two slots with support for the following formats:
• Micro SD slot: microSD/microSDHC/microSDXC/TransFlash,
• SD slot: SecureDigital, SDHC, SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with miniSD adapter, MMC Micro.
The reader supports the following flash card specifications:
• SD 1.0/1.1 (SD - Secure Digital, up to 2GB),
• SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB),
• SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB),
• MMC and eMMC 3.x/4.0/4.1/4.2/4.3/4.4/4.5/5.0 (8-bit)
• Support SD 3.01 and SD Jukebox applications (CPRM function).
• Support Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speed up to 104 MB/s.
• Support for hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function.
• 2 LUNs - in file managers, the reader is indicated as two disk drives.
• Support for FAT 12/16/32, NTFS, exFAT (FAT 64) file formats.
Other features:
• SuperSpeed USB interface - USB 3.2 Gen 1 (formerly USB 3.1 Gen 1/USB 3.0).
• Also compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1.
• Support for transfer speeds of 12/480/5000 Mbit/s (full/high/super speed).
• Full Plug and Play and Hot Swap support.
• Connection via USB connector type A male.
• Support for connecting phones with a microUSB connector via OTG reduction.
• Power supply of the reader via USB bus (bus-power).
• Blue LED indicating connection to the computer USB port (steady light) and data transfer (flashing).
• Dimensions 68 x 21 x 10 mm.
• Weight 11 g.
Supported operating systems:
• MS Windows XP/Vista/7/8/8.1/10/11 and later, Windows Server 2003/2008/2012/2016 and later (all 32- and 64-bit versions of Windows supported), Mac OS X 10.x and higher, Linux with 2.4.x and higher, Android all versions.
• Note: Drivers are included with supported operating systems and will be installed completely automatically. No other drivers need to be installed or are available.
The pack in a sealed blister with a hole for hanging contains :
• SuperSpeed USB card reader,
• USB connector cover.