Stay calm wherever you are with the iGET SECURITY M4 intelligent security system. It is wireless, communicates with your phone via WiFi and in the event of its failure, it is able to send an alarm SMS via GSM. And because it understands both Android and iOS, you can monitor indoor and outdoor IP cameras, control 230V outlets and more than 20 other types of accessories. It has a lot of logical and special functions and you can adjust its settings while sunbathing, for example on the beach.
iGET SECURITY M4
is ideal for securing all buildings - houses, apartments, cottages, offices, but also garages, shops, warehouses, offices, etc. It is a wireless alarm with simple installation and control, which not only secures your house, but can remotely or according to a timer start electrical appliances using controlled sockets, and at any time it is possible to monitor events using IP cameras. In the event of an alarm, the alarm starts recording on this camera and immediately shares the video with the application on your mobile phone. All detectors are wireless, most powered by batteries, the main unit is powered by 230 V but also has its own backup battery with a lifespan of up to 8 hours. Thanks to this, the building is constantly guarded even in the event of a power failure.
Application
The application is freely available on Google Play and iOS market. With the help of this application it is possible to make clear complete settings, add detectors, control IP cameras, controlled sockets, etc. The application is in Englishand many others. One application thus combines alarm settings and controls, IP cameras and controlled sockets, all-in-one.
Wireless transmission
No wire drawing or complicated setup is required to connect the detectors to the central unit. The detectors are wireless and most are battery powered. Adding more detectors is a matter of minutes. The central unit contains a SIM card slot with which it can send an alarm message.
Wireless detectors have a range of up to 80 m, some even 200 m. All you have to do is insert/connect the batteries and place the detector in the room. Activating and deactivating an alarm is also easy and fast, either using a wireless key fob, wireless keyboard, RFID chip or mobile application. Durable key fobs serve as alarm remote controls. It is possible to activate/deactivate the alarm, turn on the alarm, and turn on the special Home mode only for some zones.
How the alarm communicates with the application/phone
The iGET SECURITY M4 alarm is connected to the Internet. Automatically communicates with the server. An M4 Internet connection is required and can be implemented using a WiFi connection (alarm includes WiFi 802.11 b/g/n 150 Mbps) or an Ethernet cable with an RJ45 connector (10/100 Mbps). The user mobile phone must be connected to the Internet anywhere in the world using a data connection or WiFi. The alarm thus communicates with the mobile phone. The alarm cannot be connected to the Internet via data transfer via SIM card. GSM connection with SIM card is here as another/backup option how the user can contact the alarm - by sending an SMS about the alarm. Wireless IP cameras are directly connected to your home WiFi network with an Internet connection as well as an M4 alarm.
Many user accounts
The iGET SECURITY M4 alarm contains 3 levels of user accounts. The highest is the "Administrator", who performs all settings and controls. Then there is the "User" - he can control the alarm, but does not make settings (activate/deactivate/home mode/SOS, view online video from cameras, control sockets, etc.). The last level is Host, which can only control the following modes: activate/deactivate/home mode/SOS.
Quickly share settings and create an account
If the administrator wants to add more users, it very easy. Just install the "iGET M4" application on another mobile phone. Then display the sharing QR code on the first phone and scan using the second phone in the app. This completes the pairing.
Large portfolio of other accessories andwireless transmission
No wire drawing or complicated setup is required to connect the detectors to the central unit. The detectors are wireless and most are battery powered. Adding more detectors is a matter of minutes. Wireless detectors have a range of up to 80 m, selected even 200 m. All you have to do is insert/connect the batteries and place the detector in the room. All accessories that are compatible with the iGET SECURITY M4 alarm are marked iGET SECURITY M3Px (where "x" is the accessory number 1 to 99).
Controlled 230V controlled sockets
The iGET SECURITY M4 alarm includes not only security but also intelligent home management. With the help of remotely controlled sockets for controlling one 230 V appliance, it is possible to control lighting, heating, air conditioning, etc. The socket is connected to a common mains socket and the appliance to it. You can turn it on/off remotely, also set a timer or follow a function.
IP cameras
It is also possible to add wireless FullHD IP cameras iGET SECURITY M3P15v2 (indoor rotating) and M3P18v2 (outdoor fixed), and HD M3P20v2 (indoor fixed) to the iGET SECURITY M4 alarm. It is always possible to connect to this camera via online data transfer. The cameras are connected via WiFi to a wireless network.
Possibility of naming zones/detectors/controllers
iGET SECURITY M4 offers full naming of zones/detectors and all accessories. Up to 160 characters can be entered. This is more convenient and clearer than just choosing from a preset menu of room names.
Tamper protection, power disconnection
As soon as the alarm detects a signal that tries to interfere with the band on which the wireless detectors communicate, it immediately triggers an alarm. When the main power supply of the 230 V alarm is disconnected or connected, it immediately informs the user via the application. The backup battery in the alarm lasts up to 8 hours.
Low battery in the detector
If the detector has a discharged battery, the yellow/red LED on the detector will light up. However, the iGET SECURITY M4 alarm user does not have to check this. The detector sends information about low battery to the iGET SECURITY M4 alarm, which informs the user via the application.
Main parameters:
• Intelligent wireless security system with Internet connection via WiFi and Ethernet connector. In addition, it sends an SMS via the GSM mobile network in the event of an alarm. Attention: it does not have a data connection via a SIM card.
• Controls indoor and outdoor IP cameras, switches 230V controlled sockets, and communicates with more than 20 other types of wireless accessories, referred to as M3Px.
• Supports connection of up to 300 wireless accessories.
• The application for overall control and system settings is available for Android and iOS market, and is available in Englishand other languages.
• Alarm M4 also automatically downloads and installs the latest software/firmware updates from the server to keep it up to date.
• Tamper protection - as soon as the alarm detects a signal that tries to interfere with the band on which the wireless detectors communicate, it immediately triggers an alarm.
• Informs about the status/alarm via the application, in addition to sending an alarm, it also sends an SMS.
• Alarm activation and deactivation takes place using key fobs/keypad/RFID keys/application in the mobile phone.
• Includes an integrated 100 dB internal siren.
• It contains a backup battery, thanks to which the alarm is still fully active even when the main power supply is disconnected (lasting up to 8 hours), it informs the user about this main power failure via the application.
• Many options for setting alarm zones, each detector/accessory can be named by its own name.
• Includes a shock detector to detect M4 alarm damage.
• Informs the user through the application in which the battery accessory runs out of battery. This battery accessory has a high battery life of up to 2 years.
• Secret intrusion alarm: The user enters a code to turn off the alarm, but this unique code isdifferent from the classic one and activates a silent alarm in the alarm and informs other users about it.
• Range of wireless detectors up to 80 m, for selected up to 200 m. The detectors are easy to mount in the desired location.
• With the help of purchased IP cameras, you can freely monitor what is happening in the household and the phone will provide you with the current video immediately in the event of an alarm.
Package contents
1x M4 - central security unit, provides control of all wireless detectors and all control
system. It communicates via WiFi and Ethernet connector, and also sends SMS notifications via GSM.
1x M3P13v2 - wireless touch keyboard with RFID reader. Battery life up to 6 months, adapter included
1x M3P1 - wireless motion PIR detector for securing the room, high battery life up to 2 years.
1x M3P4 - wireless magnetic sensor for securing doors/windows, high battery life up to 2 years.
1x M3P5 - remote control (keychain), for quick activation and deactivation of the alarm.
2x M3P22 - RFID key for attachment to the M3P13v2 wireless keyboard, for quick activation and deactivation of the alarm.
2x Power adapter for M4 alarm and M3P13v2 keypad.
1x Detailed user manual in Czech, Slovak, English, Polish and Hungarian.
Other optional accessories
iGET SECURITY M3P1 - Wireless motion PIR detector
iGET SECURITY M3P4 - Wireless magnetic door/window detector
iGET SECURITY M3P5 - Remote control (keychain)
iGET SECURITY M3P6 - Wireless gas detector
iGET SECURITY M3P7 - Wireless SOS button
iGET SECURITY M3P9 - Wireless water detector
iGET SECURITY M3P10 - Wireless vibration detector
iGET SECURITY M3P11 - Outdoor siren
iGET SECURITY M3P13v2 - External wireless keyboard with RFID reader
iGET SECURITY M3P14 - Wireless smoke detector
iGET SECURITY M3P15 - Wireless rotating IP HD camera
iGET SECURITY M3P15v2 - Wireless rotating IP HD camera
iGET SECURITY M3P16 - Wireless controlled socket 230V
iGET SECURITY M3P17 - Wireless motion PIR detector without animal detection
iGET SECURITY M3P18 - Wireless outdoor IP HD camera
iGET SECURITY M3P18v2 - Wireless outdoor IP HD camera
iGET SECURITY M3P19 - Wireless CO (carbon monoxide) detector
iGET SECURITY M3P20 - Wireless indoor IP HD camera
iGET SECURITY M3P20v2 - Wireless indoor IP HD camera
iGET SECURITY M3P21 - Wireless magnetic door/iron door detector
iGET SECURITY M3P22 - RFID key
More information at www.iget.eu
© 2012-2023 Gear-up.me | All rights reserved. 
Easy Returns 
