Memory Type: DDR3L
Memory capacity: 16 GB
Memory Frequency: 1866 MHz
Timing: CL 11
Error correction (ECC): No
Function:
- JEDEC standard 1.35V and 1.5V Power Supply
- VDDQ = 1.35V and 1.5V
- FCK 933MHz for 1866Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6
- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 = 4 with tCCD Which does not allow seamless read or write [Either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at Lower Than TCAS 85 ° C, 3.9us at 85 ° C <TCAS? 95 ° C
- Asynchronous Reset
- Height 1.291 "(32.80 mm) w/heatsink, single sided component
Number of modules in packaging: 2 x 8 GB