D-Link DGS-1210-48 Smart switch, 48x GbE, 4x RJ45/SFP, fanless

Description
The fifth generation of D-Link DGS-1210 series Gigabit Smart switches (on sale since 2018) offers more powerful hardware, greater port flexibility and more functions. Model DGS-1210-48 (HW revision G1) is a 52-port Gigabit Ethernet Smart Managed switch without fans, suitable for SMB and access Enterprise networks. It is equipped with 48 10/100/1000Base-T RJ-45 ports and 4x Gigabit Combo RJ-45/SFP ports, where the SFP slots are two-speed and support both Gigabit SFP and Fast Ethernet SFP modules.
The DGS-1210-48 switch offers IPv6 support and an advanced set of L2 features such as virtual VLANs, QoS quality of service features, LACP link aggregation, IGMP Snooping for multicast video traffic, Spanning Tree protocols STP/RSTP for ring topologies, 802.1 security features x Radius or ACL.
The Voice VLAN function detects IP phone connections and assigns them automatically to a separate VLAN with a higher priority. A new feature is the unique Surveillance mode, which, using MAC addresses, LLDP and ONVIF protocols, can detect elements of IP camera systems (IP cameras, NVRs) from different manufacturers and automatically assign them to a separate video VLAN with a higher priority. The switch also displays the network topology directly in the switch web interface. This significantly simplifies and speeds up the deployment and management of the company network and IP camera systems.

Management of the switch is from an intuitive web interface or using SNMP commands. A compact set of Telnet CLI commands allows for basic switch settings (set IP address, password, reset, reboot, ping, FW upgrade, configuration upload/backup, show, debug). There is also a free D-Link Network Assistant (DNA) software tool that offers basic management and supervision of multiple switches in a network. The DNA tool scans the network and finds the switch even if its IP address (e.g. default IP address) is not in the same L2 segment. Subsequently, basic settings, division of switches into workgroups and mass administration, upgrade or backup can be performed. In large corporate networks, it is possible to manage switches centrally using the advanced NMP platform D-View 7 (free for 25 devices, more info and online demo at http://dview.dlink..com)

TECHNICAL SPECIFICATIONS

Interface

Number of 10/100/1000BASE-TX ports

48 ports

Number of combo 1000Base-T/SFP ports

4 ports

Performance

Switching capacity

96 Gbps

Forwarding speed of 64-bit packets

71.4 Mpps

The size of the MAC address table

16 thousand

Packet buffer

12MB

Jumbo packets

up to 10,000 bytes

Diagnostic LED indicators

Power (per device)
Connection/Activity/Speed (per 10/100/1000 Mbps port)
Connection/Activity/Speed (per combo port)

Power consumption (Standby/Maximum)

13.9W/34.2W

Input power

10 to 240 VAC, 50/60 Hz internal universal power supply

Dimensions (width x depth x height)

440 x 210 x 44 mm

Size

19" standard width for rack mount or with rack mount brackets.
1U height

Ventilation

No fan

Heat dissipation

116.7 BTU per hour

Temperature

Operating: -5° to 50°C (23° to 112°F)
Storage: from -20° to 70°C (from -4° to 158°F )

Humidity

operating: 0% ~ 95% anti-condensation
storage: 0% ~ 95% anti-condensation

Certification

CE Class A

Safety

cUL, LVD

Software Features

L2 properties
MAC address table: 8 thousand
Flow control
802.3x flow control
HOL blocking prevention
jumbo packets up to 10,000 bytes
IGMP snooping
IGMP v1/v2 Snooping
Awareness of IGMP Snooping v3
Supports 256 IGMP groups
It supports at least 64 static multicast addresses
IGMP per VLAN
Supports IGMP Snooping Querier
MLD Snooping
Supports MLD v1/v2 awareness
Supports 256 groups
Quick release
Spanning Tree Protocol
802.1D STP
802.1w RSTP
Detection of feedback loops
802.3ad link aggregation
Max. 16 groups per device/8 ports per group (DGS-1210-48P)
Port mirroring
One on one, More on one
Supports mirroring for Tx/Rx/both
Multicast filtering
Forwarding all unregistered groups
Filters all unregistered groups
LLDP, LLDP-MED

VLANs

802.1Q Tagged VLAN
VLAN group
Max. 256 static VLAN groups
Max. 4094 VIDs
Management of VLANs
Asymmetric VLAN
Auto Voice VLAN
Auto-surveillance VLAN

Quality of Service (QoS)

802.1p Quality of Service
Queue management
Strict
Weighted Round Robin (WRR)
8 queues per port
Bandwidth control
Based on ports (Ingress/Egress, min. granularity for 10/100/1000Base-T ports is 16 Kb/s)
CoS based on:
802.1p priority queues
DSCP
It with
TCP/UDP port number
IPv6 traffic class

Access Control List (ACL)

One or more ports (each rule)
ACL based on
MAC address
IPv4 address (ICMP/IGMP/TCP/UDP)
IPv6 address (ICMP/TCP/UDP)1
802.1p
DSCP
Ether type
IPv6 traffic class
ACL actions
Authorization
Refusal
Max. 6 profiles
Max. 768 records
One or more ports (each rule)

Safety

Port security
Supports up to 64 MAC addresses per port
Broadcast/Multicast/Unicast Storm Control
Static MAC
D-Link Safeguard Engine
Checking the DHCP server
Trusted host
ARP Spoofing prevention
Max. 64 inputs
SSL
Supports v1/v2/v3
Supports IPv4/IPv6
Traffic segmentation
Smart connection
Find the connected devices and click the button to bind
ARP packet inspection: 256 records
IP/4/IPv6 packet inspection: 127/63 records
Supports DHCP Snooping

AAA

802.1X port-based authentication
Supports RADIUS Server
Supports EAP, OTP, TLS, TTLS, PEAP

OAM

Cable diagnostics
Factory reset

MIB

1213 MIB II
1493 bridge MIB
1907 SNMP v2 MIB
1215 MIB convention trap
2233 MIB interface class
D-Link private MIB
Power-Ethernet MIB
LLDP MIB
D-Link zone protection MIB1

Compliance with RFC standards

RFC 783 TFTP
RFC 854 Telnet Server
RFC 951 BootP/DHCP Client
RFC 1157 SNMP v1, v2, v3
RFC 1213 MIB II, IF MIB
RFC 1215 MIB Traps Convention
RFC 1350 TFTP
RFC 1493 bridge MIB
RFC 1542 BootP/DHCP client
RFC 1769 SNTP
RFC 1901 SNMP v1, v2, v3
RFC 1907 SNMP v2 MIB
RFC 1908 SNMP v1, v2, v3
RFC 2068 FCS
RFC 2131 BootP/DHCP Client
RFC 2138 RADIUS authentication
RFC 2139 RADIUS authentication
RFC 2233 MIB class interface
RFC 2246 SSL
RFC 2475
RFC 2570 SNMP v1, v2, v3
RFC 2575 SNMP v1, v2, v3
RFC 2598 CoS
RFC 2616 FCS
RFC 2618 RADIUS authentication
RFC 2819 RMON v1
RFC 2865 RADIUS authentication

• RFC 3164 System Log
• RFC 3195 System Log
• RFC 3411-17 SNMP
• RFC 3621 Power Ethernet MIB

Management

multi language web based GUI
SmartConsole capability
Telnet Server
TFTP client
IPv6 neighbor discovery
configurable MDI/MDIX
SNMP
Supports v1, v2, v3
SNMP trap
System Log
BootP/DHCP client
D-Link network assistant support
SNTP
ICMPv6
IPv4/v6 dual stack
DHCP Auto configuration
RMON v1

Energy saving technology

• 802.3az Energy Efficient Ethernet (EEE) (disabled by default)

Energy saving thanks to:
Connection status
Cable length detection
LED or port shutdown
Standby mode of the port
System hibernation mode
Time-based PoE (PoE model only)