The metal USB 3.2 Gen 1 (USB 3.0) multi-port hub AXAGON HMA-CR3A not only connects up to three USB devices simultaneously to a laptop or computer, but also adds an SD/microSD memory card reader. The metal body of the mouthpiece is made of aluminum and thus provides perfect mechanical protection for frequent carrying. The elegant, finely structured surface prevents unwanted prints. Rubber feet prevent the mouth from sliding on the table. The firmly attached USB cable, 20 cm long, is ideal for users of mobile devices.
This compact multi-port hub also handles the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s . The hub will also allow you to charge phones and tablets with a current of up to 1.5A/5V, so you can easily charge, for example, an Android smartphone, Apple iPhone, Apple iPad, etc. from the hub.
The card reader supports all versions of SD and microSD cards, including SDXC and microSDXC with a capacity of up to 2TB. High transfer speeds are ensured by the USB 3.2 Gen 1 interface. Card reader allows simultaneous work with cards in both slots and direct copying between them.
The USB multiport hub is an ideal accessory for ultrabooks with a small number of USB-A ports or a missing reader. The hub does not shy away from connecting to phones using a suitable 1 OTG or USB-A> USB-C adapter. For example, you can connect a flash drive, keyboard, mouse to a phone or tablet and add a memory card reader.
Input:
• 1x USB 3.2 Gen 1/SuperSpeed USB port, USB-A male connector.
• Backward compatible with USB 3.1 Gen 1/USB 3.0/USB 2.0 and USB 1.1.
• USB connection connector type A male located on a firmly attached 20 cm cable.
USB outputs:
• 3x SuperSpeed USB port, USB-A female connectors.
• Support for transfer speeds of 5,000/480/12/1.5 Mb/s (SuperSpeed/High/Full/Low speed).
• The total throughput/transfer rate is given by the used USB 3.2 Gen 1 interface (theoretically 5 Gbit/s).
• USB hub can connect several external drives simultaneously.
Card reader - two slots:
• Micro SD slot: microSD/microSDHC/microSDXC/TransFlash,
• SD slot: SecureDigital/SDHC/SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD/microSDHC/microSDXC, MMC Micro.
The reader supports the following flash card specifications:
• SD 1.0/1.1 (SD - Secure Digital, up to 2GB).
• SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB).
• SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB).
• MMC and eMMC 3.x/4.0/4.1/4.2/4.3/4.4/4.5/5.0 (8-bit).
• Support SD 3.01 and SD Jukebox applications (CPRM function).
• Support Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speed up to 104 MB/s.
• Support for hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function.
• 2 LUNs - in file managers, the reader is indicated as two disk drives.
• Support for FAT 12/16/32, NTFS, exFAT (FAT 64) file formats.
Other features:
• Ability to connect devices on the fly thanks to Hot Plug support.
• Full Plug and Play support.
• Sleep mode support.
• High quality shielded cable guarantees high communication speed and minimal unwanted interference.
• White LED indicates connection to a computer.
• USB power support (bus power).
• Dimensions 84 x 24 x 18 mm.
• Weight 42 g (incl. Cable).
• USB cable length 20 cm.
Power/Charging:
• USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5 "external drive) to all three ports.
• The USB hub can also handle the permanent connection of several external drives simultaneously.
• Charge mobile devices (including iPad) with up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the USB portcomputers).
Supported operating systems:
• MS Windows XP/Vista/7/8/8.1/10 and newer, Windows Server 2003/2008/2012/2016 and newer (all 32- and 64-bit versions of Windows OS supported), Mac OS X 10.4.x and higher, Linux with kernel 2.6.x and higher, Android most versions.
• Note: Drivers are included with supported operating systems and will be installed completely automatically. No other drivers need to be installed or are available.
Package in a cardboard box with a hole for hanging contains:
• SuperSpeed USB multi hub with a fixed cable length of 20 cm,
• Multilingual manual CZ/DE/DK/ENG/ESP/FIN/FR/GR/HR/HU/IT/NL/PL/PT/RO/RU/SWE/BG/CN/TR/ARA.
1 We recommend OTG reduction for devices with micro USB connector, we recommend USB-C> USB-A reduction for devices with USB-C connector, eg AXAGON RUCM-AFA.