The AXAGON PCEM-E1 internal adapter allows you to connect mini PCI-Express cards to your computer. With this adapter, you plug in an unused mini PCI-e wifi card or bluetooth module from your laptop to your computer . You can easily connect a desktop computer to a wifi network.
With PCI-Express 2.0 1-lane, you can achieve transfer rates of up to 5 Gbps. The standard SMA connector allows you to connect any antenna for wifi. RF cable for connecting wifi/bluetooth module is fixed to SMA connector. Two LEDs on the blank indicate that the card is plugged in and the other indicates data transmission.
Inputs:
• PCI-Express 2.0 interface, compatible with PCI-Express 1.0a/1.1/2.1/3.0.
• Number of 1-Lane lines, compatible with x1/x4/x8/x16 PCIe slots.
• 1-Lane PCI-Express 2.0 bus throughput up to 5 Gbps. (bidirectional).
• mini USB 2.0 connector for connecting the USB PCI-E card to the USB port of the computer.
• 4-pin USB 2.0 connector for connecting a USB PCI-E card to a computer motherboard.
Exit:
• Standard 26-pin (8 + 18) mini PCI-Express connector for Wifi and Bluetooth modules.
Other Features:
• Full Plug and Play support.
• The card provides two modes of operation, via PCI-E or USB, can be set using jumpers.
• Complies with PCI-Express Mini Card rev. 1.2.
• Full-size support for Full-Mini (F1, F2) PCI-Express Card.
• Half-Mini (H1, H2) PCI-Express Card Support, half-Mini (H1, H2) spacer required.
• Power management support.
• Power from PCIe bus or from USB.
• The adapter does not require drivers.
• Card dimensions: 98 x 55 x 12 mm.
Supported Operating Systems:
• All versions of MS Windows, Mac OS X, Linux, and other operating systems.
• This is a pure hardware converter, the driver does not require driver installation.
Note: It is necessary to check the availability of drivers for wifi/bluetooth cards for a specific OS by the card manufacturer or OS.
The carton box contains:
• mini PCI-Express adapter with standard blanking plug
• printed installation instructions.