Universal compact SuperSpeed USB card reader AXAGON CRE-SAC supports all current versions of SD and microSD cards including SDXC and microSDXC with a capacity of up to 2TB.
Thanks to two USB-C and USB-A connectors , the reader can be directly connected to desktops or laptops, as well as to mobile phones and tablets with a USB-C connector.
Thanks to USB 3.2 Gen 1 (USB 3.0) interface, the reader achieves significantly higher bit rates for SD UHS-I cards than readers with USB 2.0 interface.
The reader will be pleased with the possibility of simultaneous work with cards in both slots and direct copying between them.
The metal body of the reader not only looks great, but also increases its durability. Both connectors are protected by caps when carrying them. The enclosed hinge allows the reader to be attached to the keyring.
The installer can handle even a complete layman - plug the reader into the USB port of a computer or mobile device and the rest is done automatically.
Card slot - two slots, supports the following formats:
• Micro SD slot: microSD/microSDHC/microSDXC/TransFlash
SD slot: SecureDigital, SDHC, SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC Mobile, RS-MMC, with miniSD adapter, microSD, microSDHC, microSDXC, MMC Micro.
The reader supports the following flash card specifications:
SD 1.0/1.1 (SD - Secure Digital, up to 2GB)
SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB)
SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB)
MMC and eMMC 3.x/4.0/4.1/4.2/4.3/4.4/4.5/5.0 (8-bit)
• Support SD 3.01 and SD Jukebox application (CPRM function).
• Supports Ultra High Speed UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds of up to 104 MB/s.
• Hardware support for ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function.
• 2 LUN - in file managers the reader is indicated as two disk drives.
• Supports FAT 12/16/32, NTFS, exFAT (FAT 64) file formats.
Other features:
• SuperSpeed USB - USB 3.2 Gen 1 (formerly USB 3.1 Gen 1/USB 3.0).
• Also compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1.
• Supports 1.5/12/480/5000 Mbit/s transfer rates (low/full/high/super speed).
• Full Plug and Play and Hot Swap support.
• Connection via USB connector type C male or type A male.
• Supports connection of phones with microUSB connector via OTG adapter.
• Powering the reader via USB bus (bus-power).
• Dimensions 75 x 22 x 12 mm with caps attached.
• Weight 18 g.
Supported operating systems:
• MS Windows XP/Vista/7/8/8.1/10 and later, Windows Server 2003/2008/2012/2016 and later (all 32- and 64-bit Windows OS supported), Mac OS X 10.x and higher Linux with kernel 2.4.x and higher, Android all versions.
• Note: Drivers are included in supported operating systems and will install automatically.
Package in cardboard box contains:
• SuperSpeed USB Card Reader
• 2 USB connector caps,
• key hanger,
• Printed multilingual manual CZ/DE/DK/ENG/ESP/FIN/FR/GR/HR/HU/IT/NL/PL/PT/RO/SWE/BG/CN/TR/ARA.