Yalla, Gear-up NOW!

0 My cart

You have no items in your shopping cart.

  • Shipping to:
  • UAE
  • BHR
  • JOR
  • KWT
  • LBN
  • OMN
  • QAT
  • KSA
  • UGA
  • TUR
  • TUN
  • TZA
  • SDN

  • PHL
  • PAK
  • NGA
  • MAR
  • KEN
  • IND
  • ETH
  • EGY
  • BGD
  • AGO
  • DZA
  • LKA
  • ZAF

Ramadan sale begins!

Start mining today pay by installments

AXAGON USB2.0 - HQ Audio 96kHz S/PDIF + col. amp.

Be the first to review this product

108.00 AED 102.00,- excl.VAT

In Stock 3-5 pcs


SKU: 29493087   PN: ADA-HP

  • Warranty 12 monthsWarranty 12 months
  • Secure PaymentSecure Payment
  • Home deliveryHome Delivery


HQ USB soundcard AXAGON ADA-HP hides in a very compact form an extraordinary combination of functions such as optical digital output, headphone amplifier or a hardware equalizer.
High-quality 24-bit audio up to 96 kHz sampling during playback even when stereo recording, eg. A mobile phone, MP3 player or necessary to digitize recordings from old cassette tapes.
Upgraded equipment in the form of digital optical S/PDIF output appreciated by lovers of quality music and for the extension of support for multichannel audio in Windows and players and filmgoers.
Headphone amplifier with accurate and convenient volume control knob allows you to connect high-quality headphones with higher impedance.
Compact and lightweight USB DAC with a USB cable-fixed is particularly suitable for laptops and allow connections only stereo headphones and stereo microphone or headset eg. For Skype, but thanks to the optical output also a quality stereo system or home theater. In an emergency well also serve as a replacement for defective original soundcards.

• 2 analog channel 16/24-bit output (3.5mm stereo jack)
stereo output for headphones or powered speakers, output also supports 4-pin headset,
• 2 analog channel 16/24-bit output (3.5mm stereo jack)
stereo line out,
• S/PDIF optical digital output (3.5 mm Toslink)
adapter for connection to an amplifier, support for Dolby Digital 5.1 surround sound (AC3) and DTS pass-through
• analog line-out and digital output share a common 3.5 mm combo jack,
• active is only one of the analog outputs can not be used simultaneously.

• 2 analog channel 16/24-bit input (3.5mm stereo jack)
stereo microphone input and an input for recording analogue signals.

Sample rate, resolution, and noise output converter (DAC):
• analog - 44.1/48/96kHz @ 16/24-bit playback,
• signal/noise ratio (SNR Output)> 95 db,
• harmonic distortion (THD + N Output) <-85 db.

Sample rate, resolution and noise of the input converter (ADC)
• analog - 44.1/48/96kHz @ 16/24-bit recording,
• signal/noise ratio (SNR Input)> 90dB
• harmonic distortion (THD + N Input) <-80 db.

• Green LED indicating correct wiring and power from the USB port of the computer,
• 3x orange LED indicates the sampling frequency of the sound played or recorded - 44.1/48/96kHz.

Headphone amplifier and equalizer HW:
• Hardware gain control via knob,
• maximum performance headphone output: 105 mW/16 ohm for each channel, 70mW/32 ohms per channel at 1kHz 0.1% THD + N.
• Headphone Drive Ability: 16 to 100 ohms.
• The hardware equalizer - Switch with three positions: D (Direct) - without sound shaping, B (Bass Boost) - Bass, T (Treble Boost) - enhances the treble.

Other features:
• Interface USB2.0 full speed 12 Mbit/s USB1.1 compatible.
• USB 2.0 connector type A male (male) to 39 cm long clamped tightly wired.
• Easy installation thanks to the full support Plug and Play.
• Connection of devices running thanks to the support Hot Plug.
• Complies with USB Audio Device Class Specification v1.0.
• Complies with USB HID Class Specification v1.1.
• Power adapter via USB bus (bus power) - no need for additional power supply.
• Compact enclosure adapter 47 x 45 x 15 mm, weight 35 g.
• Using chipset VIA VT1630A.
• Compatible with ASIO and WASAPI.

Sound card settings in Windows allows you to:
• adjust the volume and balance of your speakers,
• settings for tapping the microphone,
• Advanced features speakers: Bass boost, virtual surround sound correction by room, Volume compensation,
• set the sample rate and bit depth for reproduction and recording,
• Set up automatic gain level for the microphone (AGC - Automatic Gain Control)
• Manual adjustment of amplification level for the microphone.

Supported operating systems:
• MS Windows XP/Vista/7/8/8.1/10 and later, Windows Server 2003/2008/2012/2016 and newer (support for all 32- and 64-bit versions of Windows), Mac OS X 10.4.x higher Linux kernel 2.6.x later.
• Note .: The drivers are part of the supported operating systems and installed automatically.
• Note: To use the multi-channel audio in Windows (other operating systems are not supported multichannel audio) via an optical S/PDIF output, it is necessary to install the drivers that are available for download on www.axagon.eu.

Packed in a cardboard box with clearly specified parameters include:
• USB audio adapter, multi-language manual.

Logistics Information

Nr. of pcs in package 1
Weight (kg) 0.1470
Dimensions (cm) 21x14x3
Length (cm) 3


No reviews added yet.

Add your review

Only registered users can write reviews. Please, log in or register

Customers who viewed this item also viewed
Page 1 Of 4

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

AXAGON USB2.0 - HQ Audio 96kHz S/PDIF + col. amp.

AXAGON USB2.0 - HQ Audio 96kHz S/PDIF + col. amp.

108.00 AED 102.00,- excl.VAT

In Stock 3-5 pcs