Addonics Cipher UDD, 64-bit DES encryption, USB 2.0
Reader/writer, which provides security for data on a PCMCIA ATA Flash disks and various popular Flash media.
Addonics Cipher UDD is one of the most advanced memory read/write device that provides security for data on a PCMCIA ATA Flash disks and various popular Flash media. Addonics neprolomitelným equipped with hardware encryption Cipher UDD encrypts/decrypts data in real time using the hardware key. To install no software or password to remember. After encryption, the media appears in other Flash reader/writer, cameras and other equipment such as an empty Flash, thereby preventing unwanted access to sensitive data or evidence.
Built on the same platform as the Pocket UDD, the Cipher UDD offers the same flexibility of the interface via USB 2.0 or eSATA port by connecting the appropriate Addonics USIB cable. Because encryption and decryption does not require special software, Cipher UDD can be used in virtually any system that includes eSATA or USB port, providing excellent portability and convenience while ensuring the security of data on your flash media.
The encryption features
Hardware-based 64-bit DS, 128-bit or 192-bit TDES full disk encryption
High performance - Data is encrypted and decrypted in real-time certified cryptographic engine inside ASIC without removing CPU repsus
Encryption/Decryption using hardware keys aaenkey.gif, like the use of keys to open doors
To enable encryption and disk access, just load the encryption key into the key slot Jupiter Cipher enclosure for power
Easy to treatment without any training, software or remembering passwords
Platform independence - to use Addonics encryption products do not need to install software or drivers. Thus it can be used on any system running on any OS. It is important for organizations with multiple computing platforms and different systems.
FIPS and NIST certificates
Properties of reading/writing
Compliant with USB 2.0, USB 1.1 or eSATA
Powered directly through the USB port or optional AC/DC power adapter
Reading and writing on the PCMCIA drive, ATA Flash
Reading/Writing to CF-I, CF-II through the Addonics optional CF DigiAdaptér
Reading/Writing Smart Memory, Memory Stick, MicroDrive, Multimedia Card, Secure Digital Card through the Addonics Cipher UDD 4-in-1 DigiAdaptér
Up to 480 Mbit/s (60 MB/s) transmission for USB 2.0
To 1500 Mbit/s (150 MB/s) transmission for eSATA
USB versions work under Windows 98SE, 2000, Me, XP, 2003 server, Linux Kernel 2.4 and higher, Mac OS X and higher, Solaris 9 and above
Serial ATA version works under DOS, Windows 98SE, Me, 2000, XP, 2003 Server, Mac OS X and above, Linux Kernel 2.4 and higher, Solaris 9 and above
- Access to the XD card requires optional CF adapter from Fuji or Olympus
(1) Serial ATA hot swap feature works only with controllers based on Silicon Image chip set from our internal testing. Other controllers are not based on Silicon Image may not support hot swap. Consider adding one of the Addonics Serial ATA host controller for your system to ensure the functionality features hot swap. New controllers from Intel and other vendors may result support this feature. Please make sure the manufacturer of your controller if you need to use the hot swap feature. Hot swap is only supported on Windows 2000 and XP. On the other OS unit can be removed without a system crash. However, replacing another unit can crash the OS.
Interface: USB 2.0 or SATA
Slot type: I/II PCMCIA Card Socket
USB 2.0/1.1: Windows 98SE, 2000, Me, XP, 2003 server, Linux Kernel 2.4 and higher, Mac OS X and higher, Solaris 9 or higher.
SATA: DOS, Windows 98SE, Me, 2000, XP, 2003 Server, Mac OS X and above, Linux Kernel 2.4 and higher, Solaris 9 and above
Number of slots: one
ATA Flash, PCMCIA drive
CF-I, CF-II and MD using Addonics additional CF DigiAdaptéru (ADCFPCMCIA)
SD, SM, MS, MMC using Addonics Cipher UDD an additional 4-in-1 DigiAdaptéru (ADCUDD4IN1)
Note: Ultra CF or Flash media with multi-mode DMA at this moment are not supported
The maximum data transfer speed (depending on your computer hardware and media type)
480 Mbits/s (60 MB/s) USB 2.0
12 Mbit/s with USB 1.1
1500 Mbit/s (150 MB/s) with eSATA
Dimensions: 4.63 (W) x 5.4 (L) x .95 (V) inches
Power supply: Directly from USB or via optional AC/DC power adapter
Weight: 226 oz (roughly) without cable
Storage temperature: -20 ° C - 60 ° C
Storage humidity: 5 to 90%
Warranty: One year
- Maximum data transfer rate depends on the type of media. Due to the large number of types of flash memory and producers can transfer rate vary by brand manufacturers.
At this moment there are incompatibility issues with the following media: ATA flash with Ricoh and Hitachi kontrolérovým chip Viking ATA Flash, Olympus XD 32 MB, Fujitsu HDD Model 8340PA and 8340PA Viper
Pentium 200 Mhz or higher
At least 32 MB RAM
At least 10 MB of free disk space
One free USB 2.0, USB 1.1 or eSATA port
One of the following operating systems: Windows 98SE, 2000, Me, XP, 2003 server, Linux Kernel 2.4 and higher, Mac OS X and higher, Solaris 9 or higher.
|Nr. of pcs in package||1|
No reviews added yet.
You may also be interested in the following product(s)